For the highest thermal insulation requirements in a block window construction.
In combination with the Schüco AvanTec and Schüco TipTronic concealed fittings, Schüco AWS 75 BS.SI meets the very highest standards in terms of both design and ease of use.
- Block window system with concealed vent and outstanding thermal insulation with a basic depth of 75 mm: Ufvalues of 1.4 W/m²K
- Optimised thermal insulation due to new centre gasket and optimised installation due to innovative combination of materials
- Also available as an outward-opening system
- Vent available with Standard and RL (Residential Line) look
- Enables narrow face widths without bonding the rabate base
| System / Material | Aluminum |
PREVIEW SPECIFICATION
Schüco AWS 75 BS.HI, highly thermally insulated aluminium block window system
With 75 mm basic depth.
Design features:
Integrated system, the vent frames are positioned behind the rebate of the outer frames.
The clear dimension of the opening vents is identical to that of the fixed glazing and/or infill.
Face-fitted vent frame on the room side rebated by 10 mm from the frame edge.
Thermally insulated insulating bars with three hollow chambers form the rebate for the co-extruded, double hollow chamber centre gasket fitted with a foam core.
For improved separation of heat transfer, this must also be designed with a fin.
The joints of the external glazing retention beads are covered by the glazing gasket, which is designed as a vulcanised gasket frame.
The glazing gaskets with fins on the room side also seal off the glazing rebates.
Profile basic depths:
Outer frame, mullion, transom 75 mm
Vent frame (face-fitted window) 80 mm
Profile face widths:
Outer frame, bottom 91.5 mm
Outer frame 66.5 mm
Insert outer frame 50 mm
Mullion 107 mm
Transom 91.5 mm
Double-vent profile 83 mm
