The new solution for block window constructions with a basic depth of 65 mm.
In combination with the Schüco AvanTec and Schüco TipTronic concealed fittings, Schüco AWS 65 BS meets the very highest standards in terms of both design and ease of use.
- Good thermal insulation at basic depths of 65 mm: Uf values of 2.0 W/m²K
- Large insulation zone with insulating bars
- Comprehensive profile range with mullion face widths of up to 44 mm, insert outer frames of up to 51 mm, double vents and sash bars
- Concealed vent, very narrow face widths from 67 mm
- Optional design as “floating window”
| System / Material | Aluminum |
| Energy | Thermally insulated |
| Design | Block system |
| Basic depth | 65 mm |
| Min. face width | 67 mm |
| Uf value (>=) | 1.90 |
| Max. glass thickness | 34 mm |
| Opening type | Inward |
| Approvals Sound reduction index [dB] | 47 |
| Air permeability | Class 4 |
| Watertightness | 9A |
| Burglar resistance | RC3 |
| Wind load resistance | C5/B5 |
| Surface finishes | Powder / Anodised / Paint / Duraflon / Colour ranges |
PREVIEW SPECIFICATION
Schüco AWS 65 BS, thermally insulated aluminium block window system
With 65 mm basic depth.
Design features:
Integrated system, the vent frames are positioned behind the rebate of the outer frames.
The clear dimension of the opening vents is identical to that of the fixed glazing and/or infill.
Face-fitted vent frame on the room side rebated by 10 mm from the frame edge.
The high-volume hollow chamber profile centre gasket is located in the area of the insulation zone.
The joints of the external glazing retention beads are covered by the glazing gasket, which is designed as a vulcanised gasket frame.
Profile basic depths:
Outer frame, mullion, transom 65 mm
Vent frame (face-fitted window) 70 mm
Profile face widths:
Outer frame, bottom 91.5 mm
Outer frame 66.5 mm
Insert outer frame 50 mm
Mullion 107 mm
Transom 91.5 mm
Double-vent profile 83 mm
Fixed glazing with block outer frame 75 mm face width
Drawing dxf
(dxf/ 448 KB)
Drawing dwg
(dwg/ 269 KB)
