The Schüco FW 60+.SI mullion transom façade achieves the current climate targets – passive house-certifie
Today the Schüco Façade FW 60+.SI sets the thermal insulation standard for mullion transom façades. Even when using materials offering maximum thermal insulation, there is unrestricted design freedom as well as simple and efficient fabrication.
- Optimised thermal insulation using intelligent isolator system with Uf values to 0.70 W/(m²K) including screw factor
- Reflective surfaces on the insulating strip and on the plastic pressure plate reduce energy losses due to thermal radiation
- Can bear large glass loads of up to 700 kg per transom using system articles (FW 50+)
- Triple glazing with up to 82 mm glass thickness possible due to the comprehensive glazing support system
- A variety of products with different profile depths and a comprehensive range of cover caps to meet virtually any architectural and construction requirements
| System / Material | Aluminum |
| Energy | To passive house standard |
| Façade type | Transom-mullion |
| Uf value (>=) | 0.7 |
| Max. glass thickness | 64 mm |
| Min. face width | 60 mm |
| Poids maximum | 680 kg |
| Structural analysis | 7483,6 cm4 |
| Approvals Burglar resistance | RC3 |
| Wind load resistance | PN1600-PE2400 |
| Air permeability | A3 |
| Watertightness | RE1200 |
| Impact resistance | I5 / E5 |
| Safety barrier loading | Fully suitable for safety barrier loading |
| Wind load resistance | Permitted load (<=) 2.0 kN/m²; increased 3.0k N/m² |
